Solid Rivet (Lb) - Length: 3/8" Diameter: 7/32", Solid Rivet, 100°, Flush Head, 2117-T4 Aluminum Alloy
| Detail | Characteristic |
| COUNTERSINK ANGLE | 99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.357 INCHES MAXIMUM |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| SHANK DIAMETER | 0.218 INCHES MINIMUM AND 0.222 INCHES MAXIMUM |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SHEAR STRENGTH | 26000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | DIMPLED MATERIAL IDENTIFICATION MARK ON HEAD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL OR CHROMATE OVERALL |
| SPECIFICATION/STANDARD DATA | 80205-NAS1241 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
Welcome Back
Winback Offer
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Rivet Type |
N/A Solid |
Weight |
N/A 1 lb |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
