Washers are primarily used for distributing the load across a threaded fastener like a nut or a bolt. A washer can also be used for insulating steel screws from aluminium surfaces. Generally washers are made of metal and plastic and can serve many other uses such as a locking device, wear pad, or to reduce vibration espeically if its a rubber washer. Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of washers. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Cherry rivets are perfect for high vibration applications or double dimpled. Cherry rivets can be used as replacements for some solid rivets They are also suited for composites (such as fiberglass) as the rivet spreads in a way that prevents cracking of the material.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of cherry rivets. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Aircraft bolts are fabricated from cadmium or zinc plated corrosion resistant steel, unplated corrosion resistant steel, and anodized aluminum alloys. Most bolts used in aircraft structures are either general purpose. In certain cases, aircraft manufacturers make bolts of different dimensions or greater strength than the standard types. Such bolts are made for a particular application, and it is of extreme importance to use like bolts in replacement. Special bolts are usually identified by the letter "S" stamped on the head.

AN bolts come in three head styles - hex head, clevis, and NAS bolts are available in hex head, internal wrenching, and countersunk head styles.

The hex head aircraft bolt (AN-3 through AN-20) is an all purpose structural bolt used for general applications involving tension or shear loads where a light drive fit is permissible (0.006 inch clearance for a 5/8 inch hole, and other sizes in proportion).

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of AN bolts. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

AN screws are developed for the Aerospace/Naval industries. Unlike steel industrial screw, AN screws are mainly characterized by using an alloy that is not extremely hard. This allows a screw to double before breaking.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of an screws. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

1/4 turn fasteners are the most popular used panel fastener in the Naval & Aerospace industry. Camlocs are designed to be high perfomance, fast operating and eliminates the need for rivetting. Camlocs can be used to easily fasten/unfasten panels (such as a electrical cabinets and machine guarding) without using specilized tools and come in a variety of mounting options and styles. Camlocs consists of a receptacle, stud and a retaing ring or snap-in grommet.

Quarter Turn Fasteners offer quarter-turn, push-turn and push-push fasteners for applications where easy and quick access is required on a regular basis such as electrical cabinets and machine guarding

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of quarter turn fasteneres including Camloc brand. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of aerospace hardware kits. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our selection of aerospace kits.

For custom kits please call or Send Email your sales rep and they will gladly assist with building a custom kit for your needs.

Clamps are ideal for permanent and temporary applications on circular or irregularly-shaped items. Aerospace clamps are available in a wide selection of sizes and configurations. They also can include single or multiple latch couplings. The self-locking design and vibration resistant will not slip or loosed under demanding conditions. Aerospace clamps are smotth and can help eliminate damage to hoses.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of clamps. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Clevis pins are a solid pin with a standard flat head that secures with a formed pin through a hole drilled in the opposite end. Clevis pins are used as a quick and secure fastener in place of rivets and bolts by absorbing lateral stress and rotate to allow freedom of movement for objects.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of clevis pins. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Hi-lok collars are used in conjunction with hi-lok head pins to form a secure joint through the use of a the 2 threaded pieces. Designed for specific applications the new threaded hi-lok systems are easier to install and maintain with less special tooling needed. Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of hi-lok fasteners. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Monroe Aerospace carries a wide variety of 3M products. 3M offer you a wide array of advanced technologies for aircraft interiors, exteriors and structures.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of 3M products. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.

Jo-bolt is a trade name for an internally threaded three-piece rivet. The Jo-bolt consists of three parts - a threaded steel alloy bolt, a threaded steel nut, and an expandable stainless steel sleeve. The parts are factory preassembled. As the Jo-bolt is installed, the bolt is turned while the nut is held. This causes the sleeve to expand over the end of the nut, forming the blind head and clamping against the work. When driving is complete, a portion of the bolt breaks off. The high shear and tensile strength of the Jo-bolt makes it suitable for use in cases of high stresses where some of the other blind fasteners would not be practical. Jo-bolts are often a part of the permanent structure of late model aircraft. They are used in areas which are not often subjected to replacement or servicing. (Because it is a three part fastener, it should not be used where any part, in becoming loose, could be drawn into the engine air intake.) Other advantages of using Jo-bolts are their excellent resistance to vibration, weight saving, and fast installation by one person.

Monroe Aerospace is a stocking distributor of Aerospace and Mil-Spec hardware. We have an extensive inventory of jo-bolts. Every part that we sell is in Factory new (FN) condition and we provide our company’s certificate of conformance for all parts on every order. See below for our products.