Monroe
Monroe
399 East Drive
Melbourne, FL 32904
Phone: 877.920.1876 • Fax: 321-727-7331
Email: aerosales@askmonroe.com Cage Code: 0WTF7
Print Back

Solid Rivet (Lb) - Length: 1/2", Diameter: 1/8", 100°, Countersunk Precision Head, 2117-T4 Aluminum Alloy

Detail Characteristic
CRITICALITY CODE JUSTIFICATIONFEAT
COUNTERSINK ANGLE99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2117 OVERALL
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
SHANK STYLESTRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE FILM OVERALL OR ANODIZE OVERALL
SPECIAL FEATURESTHE ITEM IS A FLIGHT SAFETY CRITICAL AIRCRAFT PART (FSCAP).
CRITICALITY CODE JUSTIFICATIONFEAT
COUNTERSINK ANGLE99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2117 OVERALL
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
SHANK STYLESTRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE FILM OVERALL OR ANODIZE OVERALL
SPECIAL FEATURESTHE ITEM IS A FLIGHT SAFETY CRITICAL AIRCRAFT PART (FSCAP).
CRITICALITY CODE JUSTIFICATIONFEAT
COUNTERSINK ANGLE99.5 DEGREES MINIMUM AND 100.5 DEGREES MAXIMUM
FASTENER LENGTH0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.221 INCHES MINIMUM AND 0.229 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2117 OVERALL
SHANK DIAMETER0.124 INCHES MINIMUM AND 0.128 INCHES MAXIMUM
SHANK STYLESTRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH26000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTOXIDE FILM OVERALL OR ANODIZE OVERALL
SPECIAL FEATURESTHE ITEM IS A FLIGHT SAFETY CRITICAL AIRCRAFT PART (FSCAP).

Welcome Back
Winback Offer

Unit of Measure

Specifications

Inventory

 N/A {83}

Estimated Ship Date

 N/A Ships in 1 Business Day

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Rivet Type

 N/A Solid

Weight

 N/A 1 lb

Minimum Order Note

 N/A Minimum order is 1. Must order in increments of 1.

Note

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.