Camloc, 1/4 Turn Stud - S/S - Corrosion Resistant Steel, Phillips Recess, Total Panel Thickness: 0.291" - 0.320"

Detail Characteristic
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.693 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
DRIVE TYPECROSS RECESS
DIAMETER0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM
EYELET LENGTH0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
EYELET OUTSIDE DIAMETER0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM
MATERIAL ACCOMMODATED THICKNESS0.321 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE EYELET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIALSTEEL COMP 1009 EYELET OR STEEL COMP 1050 EYELET OR STEEL EYELET
MATERIALSTEEL COMP 4037 STUD
MATERIALSTEEL EJECTOR SPRING
MATERIALSTEEL PIN
SECURING DEVICE TYPESPRING
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
TURNLOCK STUD HEAD STYLEFLAT COUNTERSUNK
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.693 INCHES MINIMUM AND 0.703 INCHES MAXIMUM
DRIVE TYPECROSS RECESS
DIAMETER0.377 INCHES MINIMUM AND 0.384 INCHES MAXIMUM
EYELET LENGTH0.432 INCHES MINIMUM AND 0.452 INCHES MAXIMUM
EYELET OUTSIDE DIAMETER0.341 INCHES MINIMUM AND 0.348 INCHES MAXIMUM
MATERIAL ACCOMMODATED THICKNESS0.321 INCHES MINIMUM AND 0.350 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A108 ASSN STD SINGLE MATERIAL RESPONSE EYELET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIALSTEEL COMP 1009 EYELET OR STEEL COMP 1050 EYELET OR STEEL EYELET
MATERIALSTEEL COMP 4037 STUD
MATERIALSTEEL EJECTOR SPRING
MATERIALSTEEL PIN
SECURING DEVICE TYPESPRING
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
TURNLOCK STUD HEAD STYLEFLAT COUNTERSUNK

Welcome Back
Winback Offer

Specifications

Minimum Order

N/A 5

Inventory

N/A {1082}

Estimated Ship Date

N/A Ships in 1 Business Day

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Manufacturer

N/A Camloc

Alternate Part Number

N/A 1142012-10 S2319C10 S3413-110 SK40S5-10S

NSN

N/A 5325-01-124-1299

NIIN

N/A 01-124-1299

Part # Unpunctuated

N/A 40S510S

Minimum Order Note

N/A Minimum order is 5. Must order in increments of 5.

Note

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.