Monroe
Monroe
399 East Drive
Melbourne, FL 32904
Phone: 877.920.1876 • Fax: 321-727-7331
Email: aerosales@askmonroe.com Cage Code: 0WTF7
Print Back

Nut - Thread: 5/16-24, Self Locking Nut, Hexagon, Low Height, Aluminum Alloy, Nylon Insert, 250°,, Anodized

Detail Characteristic
BEARING SURFACE FINISH125.0 MICROINCHES
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
NUT HEIGHT0.266 INCHES MAXIMUM
NUT STYLEHEXAGON
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
LUBRICATIONSOLUBLE LUBRICANT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2,T6 FED SPEC 1ST MATERIAL RESPONSE NUT OR QQ-A-225/4,T4 FED SPEC 2ND MATERIAL RESPONSE NUT OR QQ-A-225/6,T6 FED SPEC 3RD MATERIAL RESPONSE NUT OR QQ-A-200/11,T6 FED SPEC 4TH MATERIAL RESPONSE NUT
MATERIALALUMINUM ALLOY 2014 NUT OR ALUMINUM ALLOY 2017 NUT OR ALUMINUM ALLOY 2024 NUT OR ALUMINUM ALLOY 7075 NUT
NOMINAL THREAD SIZE0.312 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL EXCEPT INSERT OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL EXCEPT INSERT
SURFACE TREATMENTANODIZE OVERALL EXCEPT INSERT OR CHROMATE OVERALL EXCEPT INSERT
TEMP RATING250.0 DEG FAHRENHEIT MAXIMUM
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNJF
THREAD QUANTITY PER INCH24
WIDTH ACROSS FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM
BEARING SURFACE FINISH125.0 MICROINCHES
BEARING SURFACE TYPECHAMFERED OR WASHER FACED
COUNTERSINK ANGLE88.0 DEGREES MINIMUM NUT
NUT HEIGHT0.266 INCHES MAXIMUM
NUT STYLEHEXAGON
LOCKING FEATUREPREVAILING TORQUE WITH NONMETALLIC INSERT
LUBRICATIONSOLUBLE LUBRICANT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-200/2,T6 FED SPEC 1ST MATERIAL RESPONSE NUT OR QQ-A-225/4,T4 FED SPEC 2ND MATERIAL RESPONSE NUT OR QQ-A-225/6,T6 FED SPEC 3RD MATERIAL RESPONSE NUT OR QQ-A-200/11,T6 FED SPEC 4TH MATERIAL RESPONSE NUT
MATERIALALUMINUM ALLOY 2014 NUT OR ALUMINUM ALLOY 2017 NUT OR ALUMINUM ALLOY 2024 NUT OR ALUMINUM ALLOY 7075 NUT
NOMINAL THREAD SIZE0.312 INCHES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL EXCEPT INSERT OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL EXCEPT INSERT
SURFACE TREATMENTANODIZE OVERALL EXCEPT INSERT OR CHROMATE OVERALL EXCEPT INSERT
TEMP RATING250.0 DEG FAHRENHEIT MAXIMUM
THREAD CLASS3B
THREAD DIRECTIONRIGHT-HAND
THREAD SERIESUNJF
THREAD QUANTITY PER INCH24
WIDTH ACROSS FLATS0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Specifications

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Weight

 N/A 0.003 lb

Alternate Part Number

 N/A NAS1022D5

NSN

 N/A 5310-00-016-7181

NIIN

 N/A 00-016-7181

Part # Unpunctuated

 N/A MS21083D5

Minimum Order Note

 N/A Minimum order is 5. Must order in increments of 1.

Note

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.