Blind Fastener - Grip Range: 0.345" - 0.406", Diameter: 0.164", General Purpose Blind Fastener, Flush Head, Internally Threaded, External Sleeve, Oversized

Detail Characteristic
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
EXPANSION DEVICETHREADED STEM
GRIP LENGTH0.345 INCHES MINIMUM AND 0.406 INCHES MAXIMUM
HARDNESS RATING39.0 ROCKWELL C MINIMUM BOLT AND 43.0 ROCKWELL C MAXIMUM BOLT
HARDNESS RATING39.0 ROCKWELL C MINIMUM NUT AND 43.0 ROCKWELL C MAXIMUM NUT
HEAD MAJOR DIAMETER0.296 INCHES MINIMUM AND 0.332 INCHES MAXIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE BOLT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE BOLT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE BOLT
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE NUT OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE NUT OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE NUT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC 1ST MATERIAL RESPONSE SLEEVE OR AMS 5639 ASSN STD 1ST MATERIAL RESPONSE SLEEVE OR AMS 5641 ASSN STD 2ND MATERIAL RESPONSE SLEEVE OR ASTM A582 ASSN STD 3RD MATERIAL RESPONSE SLEEVE
MATERIALSTEEL COMP 304 SLEEVE OR STEEL COMP 303F SLEEVE OR STEEL COMP 303 SLEEVE
MATERIALSTEEL COMP 4140 BOLT OR STEEL COMP 8740 BOLT OR STEEL COMP 4130 BOLT
MATERIALSTEEL COMP 4140 NUT OR STEEL COMP 8740 NUT OR STEEL COMP 4130 NUT
SHANK DIAMETER0.178 INCHES MINIMUM AND 0.180 INCHES MAXIMUM
SHANK STYLETHREADED SELF-PLUGGING SHANK W/SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC 1ST TREATMENT RESPONSE SLEEVE AND QQ-P-35 FED SPEC 2ND TREATMENT RESPONSE SLEEVE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE BOLT
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE NUT
SURFACE TREATMENTCADMIUM BOLT AND CHROMATE BOLT
SURFACE TREATMENTCADMIUM NUT AND CHROMATE NUT
SURFACE TREATMENTCADMIUM SLEEVE AND CHROMATE SLEEVE AND PASSIVATE SLEEVE
SPECIFICATION/STANDARD DATA80205-NAS1750 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD

Welcome Back
Winback Offer

Unit of Measure

Specifications

Inventory

N/A {0}

Estimated Ship Date

N/A {N/A}

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Features

N/A Internally Threaded

Head Type

N/A Flush

Industry Standards/Certification

N/A NAS1750

Diameter

N/A 0.164 in

Grip Range

N/A 0.345 to 0.406 in

Weight

N/A .005 lb

NSN

N/A 5320-00-317-1443

NIIN

N/A 00-317-1443

Part # Unpunctuated

N/A NAS175008L6

Minimum Order Note

N/A Minimum order is 1. Must order in increments of 1.

Note

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.