Request Information

Solid Rivet (Lb) - Length: 9/32", Diameter: 3/32", 100°, Countersunk Precision Head, 2117-T4 Aluminum Alloy

Detail Characteristic
CRITICALITY CODE JUSTIFICATIONSUPP
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
END ITEM IDENTIFICATIONW/S:CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); DEF COMM METEORL (AN/TMQ-028, AN/TCC-76, AN/TPS-068, AN-TCC-77); MISSILE, ADVANCED MEDIUM RANGE AIR-TO-AIR (AMRAAM)/AIM120A; SUPPORT EQUIPMENT, B-1 AIRCRAFT; SUPPORT EQUIPMENT, B-52 AIRCRAFT; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); TEAMMATE, AN/TRQ-32; RADAR SET, AN/PPS-5B
FASTENER LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAT TREATMENTT-4 SOLUTION HEAT TREATED OVERALL
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2117 OVERALL
SHANK DIAMETER0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLESTRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH26000 SINGLE POUNDS PER SQUARE INCH
SPECIAL FEATURESRIVET HAS 0.020 INCH MAXIMUM DEPTH DIMPLE IN HEAD, WITH A MAXIMUM DIAMETER OF 0.030 INCHES
SUPPLEMENTARY FEATURESFLIGHT SAFETY CRITICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL OR CHROMATE OVERALL
CRITICALITY CODE JUSTIFICATIONSUPP
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
END ITEM IDENTIFICATIONW/S:CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); DEF COMM METEORL (AN/TMQ-028, AN/TCC-76, AN/TPS-068, AN-TCC-77); MISSILE, ADVANCED MEDIUM RANGE AIR-TO-AIR (AMRAAM)/AIM120A; SUPPORT EQUIPMENT, B-1 AIRCRAFT; SUPPORT EQUIPMENT, B-52 AIRCRAFT; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); TEAMMATE, AN/TRQ-32; RADAR SET, AN/PPS-5B
FASTENER LENGTH0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM
HEAT TREATMENTT-4 SOLUTION HEAT TREATED OVERALL
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2117 OVERALL
SHANK DIAMETER0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM
SHANK STYLESTRAIGHT W/RADIUS CHAMFERED TIP
SHEAR STRENGTH26000 SINGLE POUNDS PER SQUARE INCH
SPECIAL FEATURESRIVET HAS 0.020 INCH MAXIMUM DEPTH DIMPLE IN HEAD, WITH A MAXIMUM DIAMETER OF 0.030 INCHES
SUPPLEMENTARY FEATURESFLIGHT SAFETY CRITICAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL OR CHROMATE OVERALL

Welcome Back
Winback Offer

Unit of Measure

Discount Table - MS20426AD3-4.5

Unit
Discount Price / %
2 - 4
$61.65
5 - 9
$61.12
10 - 24
$59.58
25   and up
$57.18

Inventory

 N/A {55}

Estimated Ship Date

 N/A Ships in 1 Business Day

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Rivet Type

 N/A Solid

Weight

 N/A 1 lb

Alternate Part Number

 N/A AN426AD3-4.5

NSN

 N/A 5320-00-117-6938

NIIN

 N/A 00-117-6938

Part # Unpunctuated

 N/A MS20426AD34.5

Minimum Order Note

 N/A Minimum order is 1. Must order in increments of 1.

Pre-Packaged Bag Quantity

 N/A 1

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.