Request Information

Socket Head Screw - Length: 1/2", Thread: 6-32, Socket Head Screw, Corrosion Resistant Steel, Passivated

Detail Characteristic
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY CONDITION A
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLEHEXAGON
NONDEFINITIVE SPEC/STD DATA6 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 304 OVERALL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.138 INCHES
SURFACE TREATMENTPASSIVATE OVERALL
TEST DATA DOCUMENT81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). OR 80205-MS16995-18 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY CONDITION A
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY MATERIAL
FASTENER LENGTH0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
HARDNESS RATING35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL
HEAD DIAMETER0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM
HEAD STYLEFLAT CHAMFER
INTERNAL DRIVE STYLEHEXAGON
NONDEFINITIVE SPEC/STD DATA6 TYPE
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP 304 OVERALL
MINIMUM TENSILE STRENGTH80000 POUNDS PER SQUARE INCH
MINIMUM YIELD STRENGTH30000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.138 INCHES
SURFACE TREATMENTPASSIVATE OVERALL
TEST DATA DOCUMENT81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). OR 80205-MS16995-18 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.).
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNC
THREAD QUANTITY PER INCH32
WIDTH ACROSS FLATS0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Sold In

N/A EA

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Weight

 N/A .005 lb

NSN

 N/A 5305-00-959-1082

NIIN

 N/A 00-959-1082

Part # Unpunctuated

 N/A NAS1352C068

Minimum Order Note

 N/A Minimum order is 50. Must order in increments of 1.

Country of Origin

 N/A USA

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.