Fillister Head Machine Screw - Length: 7/16", Thread: 4-40, Fillister Head Machine Screw, Corrosion Resistant Steel, Coarse Thread
| Detail | Characteristic |
| FASTENER LENGTH | 0.438 INCHES NOMINAL |
| HEAD DIAMETER | 0.166 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAD HEIGHT | 0.072 INCHES MINIMUM AND 0.079 INCHES MAXIMUM |
| HEAD HOLE CONFIGURATION STYLE | ROUND |
| HEAD STYLE | FILLISTER |
| HOLE DIAMETER | 0.037 INCHES NOMINAL |
| HOLE QUANTITY | 1 |
| INTERNAL DRIVE STYLE | SLOT |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.112 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD ALL MATERIAL RESPONSES |
| SCREW MATERIAL | STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | PASSIVATE |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.388 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 40 |
Welcome Back
Winback Offer
Unit of Measure
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Head Angle |
N/A 100 ? |
Industry Standards/Certification |
N/A AN507 |
Weight |
N/A .005 lb |
NSN |
N/A 5305-00-945-0506 |
NIIN |
N/A 00-945-0506 |
Part # Unpunctuated |
N/A MS35275216 |
Minimum Order Note |
N/A Minimum order is 25. Must order in increments of 1. |
Country of Origin |
N/A USA |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
