Machine Screw - Cadmium Plated Carbon Steel, Length: 7/16", Thread: 1/4-28, 100°, Countersunk, Flat Head, Machine Screw
| Detail | Characteristic |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 0.438 INCHES NOMINAL |
| HEAD DIAMETER | 0.442 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MINIMUM TENSILE STRENGTH | 60000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 1010 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC ALL TREATMENT RESPONSES |
| SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.367 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 28 |
Welcome Back
Winback Offer
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Head Angle |
N/A 100 ? |
Industry Standards/Certification |
N/A AN507 |
Weight |
N/A 0.01 lb |
Alternate Part Number |
N/A AN507-428R7 |
NSN |
N/A 5305-00-043-2696 |
NIIN |
N/A 00-043-2696 |
Part # Unpunctuated |
N/A MS24693S293 |
Minimum Order Note |
N/A Minimum order is 100. Must order in increments of 1. |
Country of Origin |
N/A USA |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
