Union - S/S (New Rev) - Tube Outer Diameter: 1/2", Thread: 3/4-16, 37°, Flared Union, Male To Male, Corrosion Resistant Steel
| Detail | Characteristic |
| CONNECTION STYLE | FLARED W/ GASKET SEAL (BOSS) ALL ENDS |
| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES ALL ENDS |
| NOMINAL OVERALL LENGTH | 1.288 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | UNION, FLARED TUBE |
| SEAT ANGLE | 37.0 DEGREES ALL ENDS |
| STYLE DESIGNATOR | FLARED W/ CENTER WRENCHING FACILITY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE |
| SURFACE TREATMENT | PASSIVATE INSIDE |
| SURFACE TREATMENT | PASSIVATE OUTSIDE |
| THREAD CLASS | 3A ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| SPECIAL FEATURES | THREE HOLES,0.0625 IN.DIA,DRILLED IN CENTER HEX SECTION; CENTER WRENCHING FACILITY SUITABLE FOR GASKET APPLICATION |
| CONNECTION STYLE | FLARED W/ GASKET SEAL (BOSS) ALL ENDS |
| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES ALL ENDS |
| NOMINAL OVERALL LENGTH | 1.288 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES ALL ENDS |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | UNION, FLARED TUBE |
| SEAT ANGLE | 37.0 DEGREES ALL ENDS |
| STYLE DESIGNATOR | FLARED W/ CENTER WRENCHING FACILITY |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-14072,E300,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE |
| SURFACE TREATMENT | PASSIVATE INSIDE |
| SURFACE TREATMENT | PASSIVATE OUTSIDE |
| THREAD CLASS | 3A ALL ENDS |
| THREAD SERIES DESIGNATOR | UNJF ALL ENDS |
| SPECIAL FEATURES | THREE HOLES,0.0625 IN.DIA,DRILLED IN CENTER HEX SECTION; CENTER WRENCHING FACILITY SUITABLE FOR GASKET APPLICATION |
Welcome Back
Winback Offer
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Weight |
N/A 0.145 lb |
Alternate Part Number |
N/A AN815-8J |
NSN |
N/A 4730-00-618-7399 |
NIIN |
N/A 00-618-7399 |
Part # Unpunctuated |
N/A AS5174J0808 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
