Delron Insert, Sleeve - Flush Head Type, See Catalog For Dimensions &Amp; Technical Data (Insert Requires 2 Pieces: Plug &Amp; Sleeve)
| Detail | Characteristic |
| BODY DIAMETER | 0.309 INCHES NOMINAL |
| FEATURES PROVIDED | GROMMET |
| FLANGE DIAMETER | 0.625 INCHES NOMINAL |
| FLANGE THICKNESS | 0.033 INCHES NOMINAL |
| HOLE TYPE | PLAIN |
| HOLE DIAMETER | 0.194 INCHES NOMINAL |
| INSERT STYLE | FLUSH FLANGE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL |
| SPECIAL FEATURES | 0.744 IN. LG |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
Welcome Back
Winback Offer
Unit of Measure
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Material |
N/A Aluminum Alloy |
Type |
N/A Thru Bolt |
Radius R |
N/A 0.045 in |
Head Style |
N/A Flush |
Panel Thickness |
N/A 0.750 in0.781 in |
Weight |
N/A .005 lb |
Typical Hole Diameter A |
N/A 0.194 in |
Typical Hole Diameter A Tolerance |
N/A ±0.003 in |
Typical Body Diameter B |
N/A 0.309 in |
Typical Head Diameter C |
N/A 0.625 in |
Countersunk Diameter D |
N/A 0.382 in |
Head Angle E |
N/A 13 º |
Sleeve Height H |
N/A 0.665 in |
Part Type |
N/A Sleeve |
Manufacturer |
N/A Delron |
Alternate Part Number |
N/A TYES102D10-12 |
NSN |
N/A 5325-00-671-9451 |
NIIN |
N/A 00-671-9451 |
Part # Unpunctuated |
N/A S102D1012 |
Minimum Order Note |
N/A Minimum order is 5. Must order in increments of 1. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
