Hi-Lok - Protruding Shear Head, Oversized For Hl18, Alloy Steel, Cadmium Plated | Diameter: 13/64", Grip Length: 9/16"

Detail Characteristic
FASTENER LENGTH0.877 INCHES MINIMUM AND 0.897 INCHES MAXIMUM
GRIP LENGTH0.567 INCHES MAXIMUM
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD STYLEERR-090
LUBRICATIONCETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD SIZE0.190 INCHES
SHANK DIAMETER0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH32
WIDTH BETWEEN FLATS0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM
FASTENER LENGTH0.877 INCHES MINIMUM AND 0.897 INCHES MAXIMUM
GRIP LENGTH0.567 INCHES MAXIMUM
HEAD HEIGHT0.045 INCHES MINIMUM AND 0.055 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.295 INCHES MINIMUM AND 0.315 INCHES MAXIMUM
HEAD STYLEERR-090
LUBRICATIONCETYL ALCOHOL, SPEC 305, HI-SHEAR CORP
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5626 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 3RD MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD SIZE0.190 INCHES
SHANK DIAMETER0.2016 INCHES MINIMUM AND 0.2026 INCHES MAXIMUM
SHANK STYLEPIN-RIVET, STRAIGHT, THREADED
SHEAR STRENGTH95000 SINGLE POUNDS PER SQUARE INCH
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH32
WIDTH BETWEEN FLATS0.0791 INCHES MINIMUM AND 0.0806 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Inventory

N/A {0}

Estimated Ship Date

N/A {N/A}

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Weight

N/A .005 lb

Alternate Part Number

N/A HL62PB6-9

NSN

N/A 5320-01-108-7651

NIIN

N/A 01-108-7651

Part # Unpunctuated

N/A BACB30FP69

Minimum Order Note

N/A Minimum order is 10. Must order in increments of 1.

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.