Hi-Lok - Protruding Shear Head, Alloy Steel, Cadmium Plated | Diameter: 1/4", Grip Length: 9/16"
Detail | Characteristic |
FASTENER LENGTH | 0.947 INCHES MINIMUM AND 0.967 INCHES MAXIMUM |
GRIP LENGTH | 0.567 INCHES MAXIMUM |
HEAD HEIGHT | 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
HEAD MAJOR DIAMETER | 0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
HEAD STYLE | ERR-090 |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD SIZE | 0.250 INCHES |
SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UNJF |
WIDTH BETWEEN FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
FASTENER LENGTH | 0.947 INCHES MINIMUM AND 0.967 INCHES MAXIMUM |
GRIP LENGTH | 0.567 INCHES MAXIMUM |
HEAD HEIGHT | 0.059 INCHES MINIMUM AND 0.069 INCHES MAXIMUM |
HEAD MAJOR DIAMETER | 0.387 INCHES MINIMUM AND 0.412 INCHES MAXIMUM |
HEAD STYLE | ERR-090 |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-6758 MIL SPEC 3RD MATERIAL RESPONSE OVERALL |
MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4130 OVERALL |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
NOMINAL THREAD SIZE | 0.250 INCHES |
SHANK DIAMETER | 0.249 INCHES MINIMUM AND 0.250 INCHES MAXIMUM |
SHANK STYLE | PIN-RIVET, STRAIGHT, THREADED |
SHEAR STRENGTH | 95000 SINGLE POUNDS PER SQUARE INCH |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD SERIES DESIGNATOR | UNJF |
WIDTH BETWEEN FLATS | 0.095 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
Welcome Back
Winback Offer
Unit of Measure
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Weight |
N/A .005 lb |
Alternate Part Number |
N/A HL18PB8-9 |
NSN |
N/A 5320-00-959-0204 |
NIIN |
N/A 00-959-0204 |
Part # Unpunctuated |
N/A BACB30FM89 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |