Close Tolerance Bolt-Drilled Shank - Length: 0.682", Grip: 0.312", Thread: 1/4-28, Hex Head, Drilled Shank, Tension, Short Thread, Cadmium Plated Alloy Steel

Detail Characteristic
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER0.487 INCHES MINIMUM FIRST HOLE AND 0.537 INCHES MAXIMUM FIRST HOLE
FASTENER LENGTH0.667 INCHES MINIMUM AND 0.697 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM
HARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.345 INCHES MINIMUM AND 0.395 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28
SPECIFICATION/STANDARD DATA80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Discount Table - NAS6204-5D

Unit
Discount Price / %
50 - 99
$4.66
100 - 499
$4.42
500 - 999
$4.17
1000   and up
$3.93

Inventory

N/A {0}

Estimated Ship Date

N/A {N/A}

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Thread Size

N/A 0.2500-28

Length

N/A 0.682 in

Grip

N/A 0.312 in

Drilling

N/A Drilled Head

Grip Tolerance

N/A ±0.010 in

Head Type

N/A Hexagon

Industry Standards/Certification

N/A NAS6204

Weight

N/A .005 lb

Alternate Part Number

N/A NAS1104-5D

NSN

N/A 5306-01-200-1415

NIIN

N/A 01-200-1415

Part # Unpunctuated

N/A NAS62045D

Minimum Order Note

N/A Minimum order is 5. Must order in increments of 1.

Country of Origin

N/A USA

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.