Bearing - Bearing, Double Row, Rod End, Internal Thread, Self Aligning
| Detail | Characteristic |
| ALIGNMENT TYPE | SELF-ALIGNING |
| BEARING SEAL TYPE | CONTACT |
| BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| INNER RING WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| OUTER RING WIDTH | 0.3180 INCHES MINIMUM AND 0.3380 INCHES MAXIMUM |
| OVERALL LENGTH | 1.7455 INCHES MINIMUM AND 1.7855 INCHES MAXIMUM |
| OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7910 INCHES MAXIMUM |
| LENGTH FROM BORE CENTER TO SHANK END | 1.3650 INCHES MINIMUM AND 1.3850 INCHES MAXIMUM |
| LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| LUBRICATION MATERIAL | GREASE |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 3652 ASSN STD SINGLE MATERIAL RESPONSE SEAL OR AMS 3666 ASSN STD SINGLE MATERIAL RESPONSE SEAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE OUTER RING |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE SHAFT |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATERIAL | STEEL COMP 4130 OUTER RING |
| MATERIAL | STEEL COMP 4130 SHAFT |
| MATERIAL | STEEL COMP E52100 BALL |
| MATERIAL | STEEL COMP E52100 INNER RING |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| SEAL QUANTITY | 2 |
| SELF-ALIGNMENT LOCATION | INTERNAL |
| SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| SHANK DIAMETER | 0.3650 INCHES MINIMUM AND 0.3850 INCHES MAXIMUM |
| SHANK STYLE | INTERNALLY THREADED W/BEAD |
| SHANK THREAD LENGTH | 0.7190 INCHES MINIMUM AND 0.7810 INCHES MAXIMUM |
| STYLE DESIGNATOR | DOUBLE ROW, STAGGERED, BALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ROD END BODY |
| SURFACE TREATMENT | CADMIUM OUTER RING |
| SURFACE TREATMENT | CADMIUM ROD END BODY |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNJF |
| THREAD QUANTITY PER INCH | 28 |
| WIDTH ACROSS FLATS | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
Welcome Back
Winback Offer
Inventory |
N/A {98} |
Estimated Ship Date |
N/A Ships in 1 Business Day |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Industry Standards/Certification |
N/A MS21153 |
Dimension H |
N/A 0.328 in |
Dimension A |
N/A 1.375 in |
Dimension B |
N/A 0.1900 in |
Dimension C |
N/A 0.750 in |
Dimension N |
N/A 0.005 in |
Dimension W |
N/A 0.437 in |
Weight |
N/A 0.055 lb |
Dimension B Tolerance |
N/A +0.0000 in-0.0003 in |
Dimension D |
N/A 0.781 in |
Dimension D Tolerance |
N/A ±0.010 in |
Dimension A Tolerance |
N/A ±0.031 in |
Dimension C Tolerance |
N/A ±0.031 in |
Dimension J |
N/A 0.375 in |
Dimension J Tolerance |
N/A +0.010 in |
Dimension H Tolerance |
N/A ±0.010 in |
Dimension W Tolerance |
N/A -0.005 in+0.000 in |
Nominal Bore Size |
N/A #10 |
Nominal Radius E |
N/A 0.390 in |
Bead or Hex Diameter K |
N/A Bead 0.438 in |
Dimension N Tolerance |
N/A -0.000 in+0.015 in |
Minimum Diameter O |
N/A 0.276 in |
Thread T UNJF-31 |
N/A 0.2500-28RH |
Locking Slot |
N/A No |
Alternate Part Number |
N/A REPB3NFS210 |
NSN |
N/A 3110-00-232-3179 |
NIIN |
N/A 00-232-3179 |
Part # Unpunctuated |
N/A MS211531 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
