Request Information

Reducer - Aluminum, Male To Male, External Thread, 37°, Flared Tube, Large End - Tube Outer Dia: 3/4", Thread: 1-1/16-12 | Small End - Tube Outer Dia: 5/8", Thread: 7/8-14

Detail Characteristic
CONNECTION STYLEFLARED (TUBE) ALL ENDS
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
CRITICALITY CODE JUSTIFICATIONFEAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/4,T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 2024 OVERALL
MAXIMUM OPERATING TEMP225.0 DEG FAHRENHEIT SINGLE RESPONSE
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SINGLE RESPONSE
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES 2ND END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.750 INCHES 1ST END
NOMINAL OVERALL LENGTH2.000 INCHES
NOMINAL THREAD SIZE0.875 INCHES 2ND END
NOMINAL THREAD SIZE1.062 INCHES 1ST END
REDUCER TYPECONCENTRIC
SEAT ANGLE37.0 DEGREES ALL ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
THREAD CLASS3A ALL ENDS
THREAD SERIES DESIGNATORUNJ 1ST END
THREAD SERIES DESIGNATORUNJF 2ND END
THREAD QUANTITY PER INCH12 1ST END
SPECIAL FEATURESSUPPORTS GRUMMAN A10A AIRCRAFT;WEAPON SYSTEM ESSENTIAL
SPECIFICATION/STANDARD DATA96906-MS24399 GOVERNMENT STANDARD AND 81349-MIL-F-5509 GOVERNMENT SPECIFICATION
CONNECTION STYLEFLARED (TUBE) ALL ENDS
CONNECTION TYPETHREADED EXTERNAL TUBE ALL ENDS
CRITICALITY CODE JUSTIFICATIONFEAT
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/4,T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/6,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL
MATERIALALUMINUM ALLOY 2014 OVERALL OR ALUMINUM ALLOY 2024 OVERALL
MAXIMUM OPERATING TEMP225.0 DEG FAHRENHEIT SINGLE RESPONSE
MEDIA FOR WHICH DESIGNEDHYDRAULIC FLUID SINGLE RESPONSE
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.625 INCHES 2ND END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.750 INCHES 1ST END
NOMINAL OVERALL LENGTH2.000 INCHES
NOMINAL THREAD SIZE0.875 INCHES 2ND END
NOMINAL THREAD SIZE1.062 INCHES 1ST END
REDUCER TYPECONCENTRIC
SEAT ANGLE37.0 DEGREES ALL ENDS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TY 2,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTANODIZE OVERALL
THREAD CLASS3A ALL ENDS
THREAD SERIES DESIGNATORUNJ 1ST END
THREAD SERIES DESIGNATORUNJF 2ND END
THREAD QUANTITY PER INCH12 1ST END
SPECIAL FEATURESSUPPORTS GRUMMAN A10A AIRCRAFT;WEAPON SYSTEM ESSENTIAL
SPECIFICATION/STANDARD DATA96906-MS24399 GOVERNMENT STANDARD AND 81349-MIL-F-5509 GOVERNMENT SPECIFICATION

Welcome Back
Winback Offer

Unit of Measure

Discount Table - AN919-20D

Unit
Discount Price / %
5 - 9
$25.62
10 - 49
$25.09
50 - 499
$22.50
500   and up
$21.49

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Material

 N/A Aluminum

Industry Standards/Certification

 N/A AN919

Alternate Item Number

 N/A AS5174D1210 1/

Dimension S

 N/A 57/64 in

Dimension W

 N/A 2 in

Weight

 N/A 0.125 lb

Dimension E

 N/A 1.375 in

Connection Type

 N/A Flare Type

Tube Outside Diameter (Large End)

 N/A 0.750 in

Thread T (Large End (Reference))

 N/A 1-1/16-12

Tube Outside Diameter (Small End)

 N/A 5/8 in

Thread T (Small End (Reference))

 N/A 7/8-14

Flare Angle

 N/A 37 º

Alternate Part Number

 N/A AS5174D1210

NSN

 N/A 4730-00-805-5100

NIIN

 N/A 00-805-5100

Part # Unpunctuated

 N/A AN91920D

Minimum Order Note

 N/A Minimum order is 1. Must order in increments of 1.

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.