Eye Bolt - Length: 17/32", Grip: 1/8", Thread: 10-32, Drilled Shank
| Detail | Characteristic |
| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.375 INCHES MINIMUM FIRST HOLE AND 0.406 INCHES MAXIMUM FIRST HOLE |
| DISTANCE FROM CENTER OF EYE TO SHANK END | 0.968 INCHES NOMINAL |
| EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| EYE OUTSIDE WIDTH | 0.437 INCHES NOMINAL |
| EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| OVERALL LENGTH | 1.186 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK LENGTH | 0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.060 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| SHOULDER DIAMETER | 0.437 INCHES NOMINAL |
| SHOULDER THICKNESS | 0.062 INCHES NOMINAL |
| STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.391 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 32 |
| DISTANCE FROM THREADED END TO SHANK HOLE CENTER | 0.375 INCHES MINIMUM FIRST HOLE AND 0.406 INCHES MAXIMUM FIRST HOLE |
| DISTANCE FROM CENTER OF EYE TO SHANK END | 0.968 INCHES NOMINAL |
| EYE INSIDE DIAMETER | 0.190 INCHES MINIMUM AND 0.192 INCHES MAXIMUM |
| EYE OUTSIDE WIDTH | 0.437 INCHES NOMINAL |
| EYE STOCK THICKNESS | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| OVERALL LENGTH | 1.186 INCHES NOMINAL |
| MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SHANK LENGTH | 0.516 INCHES MINIMUM AND 0.562 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.060 INCHES MINIMUM FIRST HOLE AND 0.080 INCHES MAXIMUM FIRST HOLE |
| SHOULDER DIAMETER | 0.437 INCHES NOMINAL |
| SHOULDER THICKNESS | 0.062 INCHES NOMINAL |
| STYLE DESIGNATOR | ROUND, CLOSED W/SHOULDER |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2 CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.391 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 32 |
Welcome Back
Winback Offer
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Weight |
N/A 0.011 lb |
NSN |
N/A 5306-00-638-2216 |
NIIN |
N/A 00-638-2216 |
Part # Unpunctuated |
N/A AN42B4 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
Country of Origin |
N/A USA |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
