Cherrymax Rivet - Diameter: 3/16", Grip Range: 0.073" - 0.125", 100°, Flush Head - Locked Spindle, Oversized Diameter, 5056 Aluminum Sleeve, 8740 Steel Stem

Detail Characteristic
END ITEM IDENTIFICATIONAIRCRAFT, PHANTOM F-4; AIRCRAFT, STARTOFORTRESS B-52; ENGINE, AIRCRAFT, TF-33-P-7 (C-141A/B); ENGINE, AIRCRAFT, TF33-PW-102 (C-135E, EC-135H/K/P) U-2 SUPPORT EQUIPMENT; TRUCK, AMBULANCE, 2-LITTER, SOFT TOP, 1 1/4 TON HMMWV; AIRCRAFT, AC-130H, MC-130H, EC-130E, HC-130); HELICOPTER, IROQUOIS UH-1; TRUCK, UTILITY, CARGO TROOP CARRIER, 5/4-TON W/E (M998); HELICOPTER, SOF / HH-53H PAVE LOW
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
EXPANSION DEVICESERRATED STEM-TYPE W
FASTENER LENGTH0.255 INCHES MINIMUM AND 0.275 INCHES MAXIMUM
GRIP LENGTH0.063 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
HEAD MAJOR DIAMETER0.270 INCHES MINIMUM
HEAD STYLEFLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER)
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE STEM
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE BODY
MATERIALALUMINUM ALLOY 5056 BODY
MATERIALSTEEL COMP 8740 STEM
SHANK DIAMETER0.202 INCHES MINIMUM AND 0.205 INCHES MAXIMUM
SHANK STYLESELF-PLUGGING MECHANICALLY LOCKED STEM
SPECIAL FEATURESNS LETTERS AFTER THE MATERIAL CODE B INDICATE NO PREFERENCE TO LOCK TYPE (MAY BE VISIBLE OR INTERNAL). RIVETS WITH NO LETTER CODE (INDICATING VISIBLE LOCK TYPE) AND RIVETS WITH THE LETTER H AFTER THE MATERIAL CODE (INDICATING INTERNAL LOCK TYPE) ARE BOTH ACCEPTABLE FOR THIS ITEM OF SUPPLY.
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-5541 MIL SPEC SINGLE TREATMENT RESPONSE BODY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE STEM
SURFACE TREATMENTCADMIUM STEM
SURFACE TREATMENTCHROMATE BODY

Welcome Back
Winback Offer

Unit of Measure

Product Notice

 Due to the ongoing volatility in supply of blind rivets, all orders are subject to review. Please contact us for inquiries about product availability.

Short Description

 CR3242-6-2

Minimum Order

 100

Inventory

Estimated Ship Date

Inventory Note

 Need additional stock? Call (877) 920-1876 or email

Material

 Aluminum

Head Type

 Flush

Diameter

 0.201 in

Grip Range

 0.063 to 0.125 in

Stem Material

 Alloy Steel

Alternate Item Number

 CR3242-6-2 CR3242-6-02

Weight

 0.0062 lb

Alternate Part Number

 CR3242-6-2 CR3242-6-02 NAS9305B6-02

NSN

 5320-01-033-8643

NIIN

 01-033-8643

Part # Unpunctuated

 CR3242602

Minimum Order Note

 Minimum order is 100. Must order in increments of 100.

Sold In

Each