Solid Rivet (Lb) - Length: 1/4", Diameter: 3/32", 100°, Countersunk Precision Head, 2117-T4 Aluminum Alloy
| Detail | Characteristic |
| CRITICALITY CODE JUSTIFICATION | SUPP |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| END ITEM IDENTIFICATION | W/S:CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); DEF COMM METEORL (AN/TMQ-028, AN/TCC-76, AN/TPS-068, AN-TCC-77); MISSILE, ADVANCED MEDIUM RANGE AIR-TO-AIR (AMRAAM)/AIM120A; SUPPORT EQUIPMENT, B-1 AIRCRAFT; SUPPORT EQUIPMENT, B-52 AIRCRAFT; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); TEAMMATE, AN/TRQ-32; RADAR SET, AN/PPS-5B |
| FASTENER LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SHEAR STRENGTH | 26000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | RIVET HAS 0.020 INCH MAXIMUM DEPTH DIMPLE IN HEAD, WITH A MAXIMUM DIAMETER OF 0.030 INCHES |
| SUPPLEMENTARY FEATURES | FLIGHT SAFETY CRITICAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL OR CHROMATE OVERALL |
| CRITICALITY CODE JUSTIFICATION | SUPP |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| END ITEM IDENTIFICATION | W/S:CLOSE IN WEAPON SYSTEM (CIWS-PHALANX); AIRCRAFT, (AC-130H, MC-130H, EC-130E, HC-130); DEF COMM METEORL (AN/TMQ-028, AN/TCC-76, AN/TPS-068, AN-TCC-77); MISSILE, ADVANCED MEDIUM RANGE AIR-TO-AIR (AMRAAM)/AIM120A; SUPPORT EQUIPMENT, B-1 AIRCRAFT; SUPPORT EQUIPMENT, B-52 AIRCRAFT; ENGINE, AIRCRAFT TF33-PW-102 (C-135E, EC-135H/K/P); TEAMMATE, AN/TRQ-32; RADAR SET, AN/PPS-5B |
| FASTENER LENGTH | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAT TREATMENT | T-4 SOLUTION HEAT TREATED OVERALL |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-430 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| SHANK DIAMETER | 0.093 INCHES MINIMUM AND 0.097 INCHES MAXIMUM |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SHEAR STRENGTH | 26000 SINGLE POUNDS PER SQUARE INCH |
| SPECIAL FEATURES | RIVET HAS 0.020 INCH MAXIMUM DEPTH DIMPLE IN HEAD, WITH A MAXIMUM DIAMETER OF 0.030 INCHES |
| SUPPLEMENTARY FEATURES | FLIGHT SAFETY CRITICAL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC 1ST TREATMENT RESPONSE OVERALL OR MIL-C-5541 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL OR CHROMATE OVERALL |
Welcome Back
Winback Offer
Inventory |
N/A $24.02 |
Estimated Ship Date |
N/A QUOTE |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Rivet Type |
N/A Solid |
Weight |
N/A 1 lb |
Alternate Part Number |
N/A 590015-25 |
NSN |
N/A 5320-00-117-6938 |
NIIN |
N/A 00-117-6938 |
Part # Unpunctuated |
N/A MS20426AD34 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
Pre-Packaged Bag Quantity |
N/A 1 |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
