Socket Head Screw - Length: 1/2", Thread: 6-32, Socket Head Screw, Corrosion Resistant Steel, Passivated
more| Detail | Characteristic |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). OR 80205-MS16995-18 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |
| WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE |
Socket Head Screw - Length: 1/2", Thread: 6-32, Socket Head Screw, Corrosion Resistant Steel, Passivated
| Detail | Characteristic |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). OR 80205-MS16995-18 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |
| WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY CONDITION A |
| DEPARTURE FROM CITED DOCUMENT | AS MODIFIED BY MATERIAL |
| FASTENER LENGTH | 0.470 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 35.0 ROCKWELL C MINIMUM OVERALL AND 36.0 ROCKWELL C MAXIMUM OVERALL |
| HEAD DIAMETER | 0.218 INCHES MINIMUM AND 0.226 INCHES MAXIMUM |
| HEAD HEIGHT | 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM |
| HEAD STYLE | FLAT CHAMFER |
| INTERNAL DRIVE STYLE | HEXAGON |
| NONDEFINITIVE SPEC/STD DATA | 6 TYPE |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OVERALL |
| MINIMUM TENSILE STRENGTH | 80000 POUNDS PER SQUARE INCH |
| MINIMUM YIELD STRENGTH | 30000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.138 INCHES |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 81348-FFS86 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS TYPICAL, AVERAGE, NOMINAL, ETC.). OR 80205-MS16995-18 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.403 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 32 |
| WIDTH ACROSS FLATS | 0.109 INCHES MINIMUM AND 0.111 INCHES MAXIMUM |
Welcome Back
Winback Offer
Unit of Measure
Sold In |
N/A EA |
Inventory |
22 |
Estimated Ship Date |
Ships in 1 Business Day |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Weight |
N/A .005 lb |
NSN |
N/A 5305-00-959-1082 |
NIIN |
N/A 00-959-1082 |
Part # Unpunctuated |
N/A NAS1352C068 |
Minimum Order Note |
N/A Minimum order is 50. Must order in increments of 1. |
Country of Origin |
N/A USA |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
