Machine Screw - Cadmium Plated Steel, Length: 1-13/32", Grip: 7/8", Thread: 1/4-28, 100°, Countersunk, Flat Head, Machine Screw, Structural
| Detail | Characteristic |
| COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| FASTENER LENGTH | 1.391 INCHES MINIMUM AND 1.438 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| HEAD DIAMETER | 0.447 INCHES MINIMUM AND 0.507 INCHES MAXIMUM |
| HEAD STYLE | FLAT COUNTERSUNK |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 8630 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | CADMIUM AND CHROMATE |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.429 INCHES MINIMUM AND 0.578 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 28 |
Welcome Back
Winback Offer
Inventory |
N/A $24.02 |
Estimated Ship Date |
N/A QUOTE |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Head Angle |
N/A 100 ? |
Industry Standards/Certification |
N/A AN507 |
Weight |
N/A 0.02 lb |
Alternate Part Number |
N/A AN509-416R22 AN509-416R22 |
NSN |
N/A 5305-00-010-5137 |
NIIN |
N/A 00-010-5137 |
Part # Unpunctuated |
N/A MS24694S109 |
Minimum Order Note |
N/A Minimum order is 10. Must order in increments of 1. |
Country of Origin |
N/A USA |
Note |
N/A
Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
