Solid Rivet (Lb) - Length: 5/16" Diameter: 9/64", Solid Rivet, 100°, Flush Head, 2117-T4 Aluminum Alloy
| Detail | Characteristic |
| COUNTERSINK ANGLE | 100.0 DEGREES NOMINAL |
| FASTENER LENGTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| HEAD MAJOR DIAMETER | 0.175 INCHES MINIMUM AND 0.183 INCHES MAXIMUM |
| HEAD STYLE | FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER) |
| MATERIAL | ALUMINUM ALLOY 2117 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | RIVET-SOLID, 100 DEGREE FLUSH HEAD, ALLUMINUM ALLOY |
| SHANK DIAMETER | 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM |
| SHANK STYLE | STRAIGHT W/RADIUS CHAMFERED TIP |
| SPECIAL FEATURES | END ITEM C-141 TCAS/TA;CONICAL SURFACE OF THE HEAD SHALL BE CONCENTRIC WITH THE SHANK OF THE RIVET WITHIN .005;HEAD COCKING ANGLE RELATIVE TO AXIS OF RIVET 1/2 DEGREE MAX;MAXIMUM HEAD DIAMETERS ARE TO THEORETICAL SHARP CORNERS AS MEASURED BY PROJECTION |
Welcome Back
Winback Offer
Unit of Measure
Inventory |
N/A {0} |
Estimated Ship Date |
N/A {N/A} |
Inventory Note |
N/A Need additional stock? Call (877) 920-1876 or email |
Rivet Type |
N/A Solid |
Weight |
N/A 1 lb |
NSN |
N/A 5320-01-468-5556 |
NIIN |
N/A 01-468-5556 |
Part # Unpunctuated |
N/A NAS1241AD35 |
Minimum Order Note |
N/A Minimum order is 1. Must order in increments of 1. |
California Residents |
N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm. |
Note |
N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment. |
