Request Information

Close Tolerance Bolt - Length: 2.425", Grip: 2.000", Thread: 1/4-28, Hex Head, Tension, Long Thread, Cadmium Plated Alloy Steel

Detail Characteristic
FASTENER LENGTH2.410 INCHES MINIMUM AND 2.440 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.425 INCHES MINIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28
SPECIFICATION/STANDARD DATA80205-NAS6603 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM
FASTENER LENGTH2.410 INCHES MINIMUM AND 2.440 INCHES MAXIMUM
GRIP DIAMETER0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM
GRIP LENGTH1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM
HEAD HEIGHT0.125 INCHES MINIMUM AND 0.140 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.425 INCHES MINIMUM
THREAD SERIES DESIGNATORUNJF
THREAD QUANTITY PER INCH28
SPECIFICATION/STANDARD DATA80205-NAS6603 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
WIDTH BETWEEN FLATS0.429 INCHES MINIMUM AND 0.439 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Thread Size

 N/A 0.2500-28

Length

 N/A 2.425 in

Grip

 N/A 2.000 in

Drilling

 N/A Undrilled Head

Grip Tolerance

 N/A ±0.010 in

Head Type

 N/A Hexagon

Industry Standards/Certification

 N/A NAS6604

Weight

 N/A .004 lb

Alternate Part Number

 N/A NAS1304-32

NSN

 N/A 5306-01-133-7918

NIIN

 N/A 01-133-7918

Part # Unpunctuated

 N/A NAS660432

Minimum Order Note

 N/A Minimum order is 5. Must order in increments of 1.

Country of Origin

 N/A USA

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.