Request Information

Machine Screw - Cadmium Plated Carbon Steel, Length: 3/8", Thread: 10-32, 100°, Countersunk, Flat Head, Machine Screw

Detail Characteristic
COUNTERSINK ANGLE99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM
END ITEM IDENTIFICATIONW/S: INTERMEDIATE FORWARD TEST EQUIP (IFTE) SYSTEM; SUPPORT EQUIPMENT, B-1 AIRCRAFT; AIRCRAFT, STRATOFORTRESS B-52; AIRCRAFT, STRATOLIFTER C-135; AIRCRAFT, B-2 BOMBER (ATB); AIRCRAFT, F-111; AVIATION ENGINE TEST SYSTEM (AETS); AIRCRAFT, HAWKEYE E-2C; F4S AIRCRAFT
FASTENER LENGTH1.375 INCHES NOMINAL
HEAD DIAMETER0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM
HEAD STYLEFLAT COUNTERSUNK
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
MINIMUM TENSILE STRENGTH60000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.190 INCHES
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-630 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-631 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-S-634 FED SPEC SINGLE MATERIAL RESPONSE
SCREW MATERIALSTEEL COMP 1010
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 3 FED SPEC ALL TREATMENT RESPONSES
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.313 INCHES MINIMUM AND 1.375 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH32

Welcome Back
Winback Offer

Unit of Measure

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Head Angle

 N/A 100 ?

Industry Standards/Certification

 N/A AN507

Weight

 N/A 0.01 lb

Alternate Part Number

 N/A AN507-1032R22

NSN

 N/A 5305-00-150-9747

NIIN

 N/A 00-150-9747

Part # Unpunctuated

 N/A MS24693S279

Minimum Order Note

 N/A Minimum order is 100. Must order in increments of 1.

Country of Origin

 N/A USA

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.