Request Information

Close Tolerance Bolt - Length: 1-9/32", Grip: 13/16", Thread: 1/4-28, Cadmium Plated Steel, Drilled Shank, Drilled Head

Detail Characteristic
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.124 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
GRIP DIAMETER0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON FLATS
HOLE DIAMETER0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE TYPEDRILLED
HOLE QUANTITY1
MATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.437 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH28
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER1.124 INCHES NOMINAL FIRST HOLE
FASTENER LENGTH1.265 INCHES MINIMUM AND 1.312 INCHES MAXIMUM
GRIP DIAMETER0.2487 INCHES MINIMUM AND 0.2492 INCHES MAXIMUM
GRIP LENGTH0.796 INCHES MINIMUM AND 0.828 INCHES MAXIMUM
HARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
HEAD HEIGHT0.140 INCHES MINIMUM AND 0.172 INCHES MAXIMUM
HEAD STYLEHEXAGON
HOLE CONFIGURATION STYLEHEXAGON FLATS
HOLE DIAMETER0.046 INCHES MINIMUM AND 0.056 INCHES MAXIMUM
HOLE TYPEDRILLED
HOLE QUANTITY1
MATERIALSTEEL COMP 4140 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 8630 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 4130 OVERALL OR STEEL COMP 4037 OVERALL
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
NOMINAL THREAD DIAMETER0.250 INCHES
SHANK UNTHREADED HOLE DIAMETER0.076 INCHES MINIMUM FIRST HOLE AND 0.086 INCHES MAXIMUM FIRST HOLE
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TYPE 2 CLASS 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.437 INCHES MINIMUM AND 0.516 INCHES MAXIMUM
THREAD SERIES DESIGNATORUNF
THREAD QUANTITY PER INCH28
WIDTH BETWEEN FLATS0.428 INCHES MINIMUM AND 0.440 INCHES MAXIMUM

Welcome Back
Winback Offer

Unit of Measure

Inventory

 N/A {0}

Estimated Ship Date

 N/A {N/A}

Inventory Note

 N/A Need additional stock? Call (877) 920-1876 or email

Weight

 N/A 0.03 lb

NSN

 N/A 5306-00-145-7659

NIIN

 N/A 00-145-7659

Part # Unpunctuated

 N/A AN174H12

Minimum Order Note

 N/A Minimum order is 5. Must order in increments of 1.

Country of Origin

 N/A USA

Note

 N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

 N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.