Aeroquip Wire Reinforced PTFE Hose Assemblies Swivel Flared to Swivel Flared.

Welcome Back
Winback Offer

Unit of Measure

Inventory

N/A {0}

Estimated Ship Date

N/A {N/A}

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Minimum Hose Inside Diameter

N/A 0.406 in

Maximum Hose Outside Diameter

N/A 0.585 in

Operating Pressure

N/A 1500 psi

Proof Pressure

N/A 3000 psi

Hose Size

N/A 8

Fluid Temperature

N/A -65 to +275 ºF

Design Features

N/A
  • Flexibility
  • Lightweight
  • Available in sizes 3 thru 8
  • Able to withstand prolonged flexing and vibration
  • Capable of conducting a direct current
  • Essentially zero moisture absorption
  • Chemical inertness & anti-adhesive characteristics
  • Aluminum Compression Crimp fittings

Conductivity

N/A The PTFE liner has sufficient conductivity to prevent electrostatically induced hose failures. The tube is capable of conducting a direct current equal to or greater than 10 micro amps in sizes 4 thru 8, and 20 micro amps in size 10 and above, with a potential of 1,000 volts.

Basic Specifications

N/A 666 hose assemblies and compression fittings all comply with the MIL-DTL-25579C industry standard for 1500 psi, high temperature line for aircraft and missile fluid systems.

Material

N/A PTFE

Weight

N/A .005 lb

Minimum Burst Pressure

N/A 8000 psi

Mil-Spec Approvals

N/A Mil-DTL-25579C Assemblies Mil-DTL-27267 Hose

Assembly Material

N/A Steel

MS Style Code

N/A A

Assembly Base Number

N/A AE3660000

Nipple A Part Number

N/A AE21496

Nipple B Part Number

N/A AE21496

Minimum Order Note

N/A Minimum order is 1. Must order in increments of 1.

Minimum Bend Radius

N/A 4.62 in

Thread Size

N/A 0.750-16

Construction

N/A Inner tube is made of a spiral extruded PTFE resin reinforced with stainless steel and covered with a Type 300 Series steel wire braid.

Applications

N/A Aeroquip brand PTFE hoses are unaffected by all fuels, oils, alcohols, coolants or solvents and are also inert to acids both concentrated and diluted, and propellants used in missiles. This is why the 666 PTFE hose may be used for all hydrocarbon fuel systems at pressures up to 600 psi.

Identification

N/A Identification bands show specification numbers, manufacturer's code numbers, operating pressure, assembly date and other required information.

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.