Camloc, Winged 1/4 Turn Stud - Corrosion Resistant Steel, Winged, Total Panel Thickness: 0.210" - 0.239", (Sold Only In Stainless Steel See Replacement Number)

Detail Characteristic
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.722 INCHES MINIMUM AND 0.737 INCHES MAXIMUM
EYELET LENGTH0.322 INCHES NOMINAL
EYELET OUTSIDE DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD LENGTH0.720 INCHES NOMINAL
MATERIAL ACCOMMODATED THICKNESS0.180 INCHES MINIMUM AND 0.239 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A322 ASSN STD 1ST MATERIAL RESPONSE STUD OR ASTM A331 ASSN STD 2ND MATERIAL RESPONSE STUD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE EYELET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIALSTEEL COMP 1009 EYELET
MATERIALSTEEL COMP 4037 STUD
MATERIALSTEEL EJECTOR SPRING
MATERIALSTEEL PIN
STUD HEAD HEIGHT0.440 INCHES NOMINAL
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
TURNLOCK STUD HEAD STYLEFLAT FILLISTER WING
DISTANCE FROM ENGAGING MEMBER TO LARGEST BEARING SURFACE OF HEAD0.722 INCHES MINIMUM AND 0.737 INCHES MAXIMUM
EYELET LENGTH0.322 INCHES NOMINAL
EYELET OUTSIDE DIAMETER0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
HEAD LENGTH0.720 INCHES NOMINAL
MATERIAL ACCOMMODATED THICKNESS0.180 INCHES MINIMUM AND 0.239 INCHES MAXIMUM
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A322 ASSN STD 1ST MATERIAL RESPONSE STUD OR ASTM A331 ASSN STD 2ND MATERIAL RESPONSE STUD
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-698 FED SPEC SINGLE MATERIAL RESPONSE EYELET
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE EJECTOR SPRING
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-W-470 FED SPEC SINGLE MATERIAL RESPONSE PIN
MATERIALSTEEL COMP 1009 EYELET
MATERIALSTEEL COMP 4037 STUD
MATERIALSTEEL EJECTOR SPRING
MATERIALSTEEL PIN
STUD HEAD HEIGHT0.440 INCHES NOMINAL
STUD ASSEMBLY STYLESTUD ASSEMBLY
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
TURNLOCK STUD HEAD STYLEFLAT FILLISTER WING

MC1018
5% off code from Mini Catalog

Specifications

Minimum Order

N/A 1

Inventory Note

N/A Need additional stock? Call (877) 920-1876 or email

Alternate Part Number

N/A 1126010-7

NSN

N/A 5325-00-298-7005

NIIN

N/A 00-298-7005

Part (unpuctuated)

N/A 26007W

Minimum Order Note

N/A You must purchase in increments of 1 at a time.

Note

California Residents

N/A Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer, and birth defects or other reproductive harm.