Washer Head Machine Screw - Length: 1-1/2", Grip: 1-3/32", Thread: 10-32, Cadmium Plated Steel, Phillips Recess
| 5305001800285 | |
| Category | Description |
| EXTENDED WASHER DIAMETER | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| EXTENDED WASHER THICKNESS | 0.025 INCHES MINIMUM AND 0.030 INCHES MAXIMUM |
| FASTENER LENGTH | 1.469 INCHES MINIMUM AND 1.531 INCHES MAXIMUM |
| HEAD DIAMETER | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| HEAD HEIGHT | 0.089 INCHES MINIMUM AND 0.099 INCHES MAXIMUM |
| HEAD STYLE | ROUND EXTENDED WASHER |
| INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC 1ST MATERIAL RESPONSE OR AMS 6300 ASSN STD 2ND MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 8630 OR STEEL COMP 4037 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325 FED SPEC 2ND TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | CADMIUM OR ZINC |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.298 INCHES MINIMUM AND 0.453 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD QUANTITY PER INCH | 32 |
Unit of Measure
Specifications
Inventory (East - Florida) |
N/A 12118 |
Sold In |
N/A Per Package |
Thread Size |
N/A 10-32 |
Material |
N/A Steel Alloy |
Length |
N/A 1-1/2 in |
Grip |
N/A 1-3/32 in |
Head Type |
N/A Washer |
Industry Standards/Certification |
N/A AN525 |
Alternate Part Number |
N/A Possible |
NSN |
N/A 5305-00-180-0285 5305-00-982-2618 |
NIIN |
N/A 00-180-0285 00-982-2618 |
Part (unpuctuated) |
N/A AN52510R24 |
Minimum Order Note |
N/A You must purchase in increments of 50 at a time. |
