Fillister Head Screw - Length: 3/4", Thread: 1/4-20, Steel, Cadmium Plated, Drilled Head
| Detail | Characteristic |
| FASTENER LENGTH | 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM |
| HARDNESS RATING | 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM |
| HEAD DIAMETER | 0.389 INCHES MINIMUM AND 0.414 INCHES MAXIMUM |
| HEAD HEIGHT | 0.161 INCHES MINIMUM AND 0.170 INCHES MAXIMUM |
| HEAD HOLE CONFIGURATION STYLE | ROUND |
| HEAD STYLE | FILLISTER |
| HOLE DIAMETER | 0.062 INCHES NOMINAL |
| HOLE QUANTITY | 1 |
| INTERNAL DRIVE STYLE | SLOT |
| MINIMUM TENSILE STRENGTH | 125000 POUNDS PER SQUARE INCH |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| SCREW MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE OR AN-S-9 MIL STD SINGLE MATERIAL RESPONSE |
| SCREW MATERIAL | STEEL COMP 8630 |
| SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 3 FED SPEC SINGLE TREATMENT RESPONSE |
| SCREW SURFACE TREATMENT | CADMIUM |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.641 INCHES MINIMUM AND 0.704 INCHES MAXIMUM |
| THREAD SERIES DESIGNATOR | UNC |
| THREAD QUANTITY PER INCH | 20 |
Unit of Measure
Specifications
Inventory (East - Florida) |
N/A 1140 |
Sold In |
N/A Per Package |
Thread Size |
N/A 1/4-28 |
Length |
N/A 3/4 in |
Drilling |
N/A Drilled Head |
Head Type |
N/A Fillister |
Drive Style |
N/A Slotted |
Industry Standards/Certification |
N/A AN503 |
NSN |
N/A 5305-00-150-9267 |
NIIN |
N/A 00-150-9267 |
Part (unpuctuated) |
N/A AN50341612 |
Minimum Order Note |
N/A You must purchase in increments of 10 at a time. |
