Aeroquip Fire Sleeve - Diameter: 1", Single Layer Of Braided Fiberglass Tubing Impregnated With Flame Resistant Silicone Rubber, Temperature Range: -65°, - 500°, F

Detail Characteristic
DESIGN FORMFULL ROUND
FABRICATION METHODBRAIDED
FLAMMABILITY RATINGINCOMBUSTIBLE
FLEXIBILITYFLEXIBLE
INSIDE DIAMETER1.000 INCHES NOMINAL
INSULATION THICKNESS0.125 INCHES NOMINAL
OUTER COVERING ENVIRONMENTAL PROTECTIONFIRE RETARDANT
LAYER QUANTITY1
MATERIALGLASS FIBER
SPECIAL FEATURESLENGTH SHALL BE AS SPECIFIED; NORMAL COMMERCIAL MAXIMUM LENGTH PER PIECE 20 FT
TEMP RATING-65.0 DEG FAHRENHEIT MINIMUM AND 500.0 DEG FAHRENHEIT MAXIMUM
Unit of Measure

Specifications

Inventory (East - Florida)

N/A Call (877) 920-1876 or email

Industry Standards/Certification

N/A FAATSO-C53 TSO-C75

Inside Diameter

N/A 1 in

Operating Temperature

N/A -65 to +500 ºF

Manufacturer

N/A Aeroquip

Also Use with Clamp

N/A 900591B-3C

Also Use with Hose Item Number MIL-H-6000

N/A 3/4

NSN

N/A 5640-00-568-4640

NIIN

N/A 00-568-4640

Part (unpuctuated)

N/A AE10216

Minimum Order Note

N/A You must purchase in increments of 1 at a time.

Construction

Construction

N/A Specially developed to meet the fire resistance requirements of FAATSO-C53 or TSO-C75. Uniform layer of fiberglass tubing impregnated and overlaid with a flame resistant silicone rubber. Asbestos yarn used in the braid is closely spun to provide maximum protection. The silicone rubber will not soften, peel, blister or harden after contact with MIL-H-5606, distilled water, MIL-L-7808, MIL-L-6082, or Skydrol 500.

Applications

Applications

N/A Can be used for all fuel, Oil, hydraulic, fire extinguisher and propeller feathering lines. (Use 900591B Clamps to secure firesleeve material).

Identification

Identification

N/A Outer surface is orange in color, with a simple black layline consisting of "Aeroquip AE102/624-size-code" every 10 inches.

Note

Note

N/A Our inventory is extensive. The majority of the items listed in our catalog are stocked and available for immediate shipment.